Several lubrication methods for different bearings pour point depressant additives

Oil storage tank infiltration method: This is a common lubrication technique, specifically suitable for low to medium-speed operating settings. The self-aligning ball bearing is partly submersed in lubricating oil. When the component revolves, the lubricating oil is gotten and after that recedes right into the oil sump. The oil degree ought to be slightly less than the center of the bottom of the sphere to make sure optimum lubrication.

Oil dripping approach: For birthing parts that call for exact quantities of lubricating oil, the oil dripping approach is a good choice. The regularity of oil leaking is typically controlled to one decrease every 3 to 8 seconds. Too much lubricating oil might cause the bearing temperature level to climb.

(bearings lubrication)

Circulation approach: This technique makes use of an oil pump to transport filteringed system lubricating oil to the bearing elements. The lubricating oil, after passing through the bearing, is filtered and cooled prior to reuse. Since flowing oil can effectively get rid of warmth, this method is particularly ideal for high-speed bearing parts.

Spray technique: Mix dry compressed air and lubricating oil with a sprayer to create an oil haze and spray it onto the bearing. This approach can not only efficiently decrease the bearing temperature level but additionally avoid the intrusion of impurities. It is particularly appropriate for birthing lubrication in high-speed and high-temperature environments.

Shot approach: Utilize an oil pump to infuse high-pressure lubricating oil straight onto the bearing via a nozzle, and afterwards the lubricating oil streams right into the oil groove from the other end of the bearing. When the bearing rotates at broadband, the high-speed turning of its moving aspects and cage will create air flow. This method can successfully utilize this air flow for lubrication.


Infomak is dedicated to the technology development of special oil additives, combined the Technology of nanomaterials developed dry lubricant and oil additives two series. It accepts payment via Credit Card, T/T, West Union and Paypal. Infomak will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you are looking for high-quality pour point depressant additives, please feel free to contact us and send an inquiry.

Inquiry us

    Author: admin