Risk aversion plunged on the positive news of the Russia-Ukraine talks. After several days of rising oil prices, the price of precious metals continued to fall. Domestic futures markets remain stable for the time being.
Back in international markets, WTI crude futures briefly dipped below $100 a barrel, while Brent crude hit its lowest intraday level in nearly two weeks. Spot gold briefly fell below $1,900 an ounce. Comex gold futures closed down 1.1 percent at $1,918.4 an ounce. Comex silver futures closed down 1.14 percent at $24.91 an ounce. "Recently, crude oil prices have been extremely sensitive to changes in geopolitical news." Traders believe that the current oil price is still in the broad impact, Ukraine will still be a premium in the case, although the market further decline, but should not be too pessimistic, it is recommended to wait and see for the time being. The Ukrainian premium is still there and there will be some volatility in the Molybdenum disilicide MoSi2 powder market.
Molybdenum disilicide MoSi2 powder overview
Molybdenum disilicide MoSi2 powder is an inorganic compound with the chemical formula MoSi2, which is a gray metallic solid. Insoluble in most acids, but soluble in nitric acid and hydrofluoric acid. The radii of the two kinds of atoms are not much different, the electronegativity is relatively close, and they have properties similar to those of metals and ceramics. Molybdenum disilicide is conductive and can form a passivation layer of silicon dioxide on the surface at high temperatures to prevent further oxidation. It is used in high-temperature anti-oxidation coating materials, electric heating elements, integrated electrode films, structural materials, reinforcing agents for composite materials, wear-resistant materials, and connecting materials for structural ceramics.
Physicochemical properties of molybdenum disilicide MoSi2
Molybdenum disilicide MoSi2 is an intermediate phase with the highest silicon content in the Mo-Si binary alloy system, and it is a Dalton-type intermetallic compound with a fixed composition. With the dual characteristics of metal and ceramics, it is a high-temperature material with excellent performance. Very good high temperature oxidation resistance, the oxidation resistance temperature is as high as 1600℃, which is equivalent to SiC; moderate density (6.24g/cm3); low thermal expansion coefficient (8.1×10-6K-1); good electrical and thermal conductivity Properties; higher brittle-to-ductile transition temperature (1000℃) below has ceramic-like hardness and brittleness. It is metal-like soft plasticity above 1000°C. MoSi is mainly used as heating elements, integrated circuits, high-temperature anti-oxidation coatings and high-temperature structural materials.
In MoSi2, molybdenum and silicon are connected by metal bonds, and silicon and silicon are connected by covalent bonds. Molybdenum disilicide is a gray tetragonal crystal. It is insoluble in general mineral acids (including aqua regia), but soluble in a mixed acid of nitric acid and hydrofluoric acid. It has good high temperature oxidation resistance and can be used as a heating element working in high temperature (<1700°C) oxidizing atmosphere.
In an oxidizing atmosphere, a protective film is formed on the surface of the dense quartz glass (SiO2) that burns at a high temperature to prevent continuous oxidation of molybdenum disilicide. When the temperature of the heating element is higher than 1700°C, a SiO2 protective film is formed, which fuses at a melting point of 1710°C, and merges with SiO2 into a molten drop. Because of the action of its surface extension, it loses its protective ability. Under the action of the oxidant, when the element is used continuously, it forms a protective film again. It should be noted that due to the strong oxidation at low temperatures, this element cannot be used for a long time in a temperature environment of 400-700°C.
Molybdenum disilicide MoSi2 powder application
Molybdenum disilicide MoSi2 is used in high-temperature oxidation-resistant coating materials, electric heating elements, integrated electrode membranes, structural materials, composite reinforcement materials, wear-resistant materials, structural ceramic connecting materials and other fields, and are distributed in the following industries:
1) Energy and chemical industry: MoSi2 is used as electric heating element, high temperature heat exchanger of atomic reactor device, gas burner, high temperature thermocouple and its protection tube, smelting vessel crucible (used for smelting sodium, lithium, lead, bismuth, tin and other metals) .
2) Microelectronics industry: MoSi2 and other refractory metal silicides Ti5Si3, WSi2, TaSi2, etc. are important candidates for large-scale integrated circuit gates and interconnections.
3) Aerospace industry: MoSi2 as a high-temperature anti-oxidation coating material, especially as a material for turbine engine components, such as blades, impellers, combustion chambers, nozzles and sealing devices, has been widely and in-depth Research and application.
4) Automobile industry: Molybdenum disilicide MoSi2 is used in automobile turbocharger rotors, valve bodies, spark plugs and engine parts.
Molybdenum disilicide MoSi2 price
The price of molybdenum disilicide MoSi2 varies randomly with factors such as production costs, transportation costs, international conditions, exchange rates, and the supply and demand relationship of molybdenum disilicide MoSi2. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for molybdenum disilicide MoSi2 material, please feel free to contact to get the latest price of molybdenum disilicide MoSi2.
Molybdenum disilicide MoSi2 supplier
As a global supplier of molybdenum disilicide MoSi2, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (titanium silicide, tantalum silicide, zirconium silicide, etc.). High-purity targets, functional ceramics and structural devices, and provide OEM services.
Chemical Composition of Molybdenum Silicide MoSi2 Powder
Overall, the demand for Molybdenum disilicide MoSi2 powder is on the rise, and future Molybdenum disilicide MoSi2 powder will continue to evolve. Although the prosperity of the brand name has rebounded, there are still many outstanding problems in Molybdenum disilicide MoSi2 powder, and the Molybdenum disilicide MoSi2 powder will develop steadily，if you need Molybdenum disilicide MoSi2 powder please contact us.
UBS believes that the recent drop in oil prices does not fully explain the constraints on global supply. Due to rising prices or insufficient supply of natural gas or coal, more global use of oil power generation will boost oil demand; China's oil im…
Chromium silicide, known as CrSi2 powder, is an inorganic silicide that is dark gray powder. For chromium silicide films, glass coatings, silicide targets, silicide sputtering targets and N-type semiconductors.…
Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…